Mesin Uji Gesekan dan Keausan MM-W1B Vertical Universal Friction and Wear Testing Machine

Main technical performance indicators

1. Maximum test force: 1kN
2. Test force working range: 0.4% ~ 100% of the maximum test force
3. The relative error of the indication value of the test force is not greater than : ± 1% , and the error of the indication value below 200N is not greater than: ±2N
4. When the test force is long, the relative error of the indication value is automatically maintained, and the relative error is not greater than: ±1%F N
5. Measured maximum friction torque: 2.5Nm
6. The relative error of the friction torque indication value is not greater than: ±2%
7. Friction sensor: 50N
8. Friction arm distance: 50mm
9. Spindle stepless speed change system: 1r/mi ~ 2000r/min
10. The spindle speed error above 100r/min is not greater than: ±5r/min
11. The spindle speed error below 100r/min is not greater than: ±1r/min
12. Special deceleration system: 0.05r/min ~ 20r/min
13. Test medium: oil, water, mud, abrasive, etc.
14. Heater working range: room temperature ~ 200 ℃ (260 ℃ )
15. Temperature measurement control accuracy: ±2℃
16. Testing machine spindle taper: 1:7
17. The maximum distance between the main shaft of the testing machine and the lower sub plate: ≥75mm
18. Testing machine spindle control mode: manual control, time control, revolution control , friction torque control
19. Testing machine time display and control range: 0s～9999min
20. Test revolution display and control range: 0～9999999
21. Spindle motor rated power: 1kW
22. Dimensions of the testing machine <L×B×H>: 700mm×680mm×1560mm
23. Test machine net weight: 400kg